Pages

Monday, September 30, 2013

How to Calculate the Interior Space for Restaurant Seatings

Restaurant space is generally divided into kitchen and dining room spaces. The standard formula for restaurant layout allots about 60 percent of the space for dining and 40 percent for the kitchen and storage area. After square footage has been measured and allotted for the kitchen area, if this is not already determined by existing walls and dividers, the seating capacity of the dining area must be determined through measurement and calculation.

Instructions

    1

    Determine the total square footage of the main restaurant dining area. Measure the length and width of the room and multiply the two figures together to arrive at the square footage.

    2

    Determine the amount of square footage lost from indentations into the overall space. Calculate these by separately measuring the outside length and width of the indentation and multiplying the two figures together. Deduct this amount from the square footage calculated in Step 1.

    3

    Use the same method to determine the square footage of any side dining rooms or extra spaces.

    4

    Divide the square footage of each room by 10, 15 or 20, depending on the type of restaurant that is planned. Banquet seating, which packs patrons closely together, may require only 10 square feet per person, while a fine dining layout calls for double this figure. General restaurant use calls for a formula of approximately 15 square feet per person, which will allow for access between tables as well as stations for the servers. As an example, if the available space is 1,000 square feet, the seating capacity will be approximately 50 for fine dining, 67 for general restaurants and 100 for banquet seating.

    5

    Add the capacity of each dining area together to determine the total seating capacity of the restaurant. Decide what proportion of the restaurant space is to be occupied by booths, tables and/or counter seating. Booths typically require 10 square feet per person, while counters call for close to 20 square feet per person.

Sunday, September 29, 2013

How to Build a Homemade TV Stand

How to Build a Homemade TV Stand

Like most homeowners, you probably need someplace to put your television. The television-stand industry is huge because all television owners need someplace to put it with extra storage for a DVD player or video game system. Instead of spending the money to purchase a TV stand, building one is simply a matter of attaching the right size of plywood together to form a sturdy box.

Instructions

    1

    Fit together a rectangular frame with the two pieces of 18-by-25-inch, 3/4 inch plywood and the two pieces of 18-by-23 3/4-inch, 3/4-inch plywood. The frame should be constructed so that the 18-by-23 3/4-inch plywood pieces are in between the 18-by-25-inch pieces.

    2

    Square the angles of the frame with the carpenter's square and screw the frame together. Drive screws through the 18-by-25-inch plywood so that they attach to the smaller boards with screws every 4 to 6 inches. Stand the frame up so that one of the 18-by-25-inch boards are flat on the ground.

    3

    Measure down from the bottom of the top piece of plywood 6 inches toward the center of the frame. Make a mark at this location. Place the piece of 18-by-23 1/2-inch plywood inside the frame at this mark so it is parallel with the top and bottom. Square the angles with the carpenter's square and screw this shelf to the frame by driving the wood screws through the sides of the frame and into the shelf. Screws should be 4 to 6 inches apart.

    4

    Place the piece of 25-by-25 1/4-inch plywood over one side of the open frame so that it covers one of the openings. Screw this piece, which will form the back of the cabinet, to the frame by driving in screws in all four corners and then around the perimeter every 4 to 6 inches.

    5

    Drill a hole through the back of the cabinet inside the shelf with the hole saw. This allows any cords to pass through the stand unobstructed.

How to Build a Competition Ping Pong Table

Ping pong became extremely trendy in the United States after President Nixon opened up relations with China, where it is a national game -- and it has remained popular ever since. Tournament quality ping pong tables (also called tennis tables), available through many retail outlets and websites, are usually quite expensive, ranging from $300 to $1,500. However, if you are just a little bit handy, you can build your own for a fraction of the cost.

Instructions

How to Build a Competition Ping Pong Table

    1

    Sand the HDF boards. HDF board is very smooth, so you are sanding to create a surface that the paint will stick to.

    2

    Sand the edges of the boards to remove any burrs that may be sticking out.

    3

    Use the paint roller to paint the surface of the top and edges of the HDF boards.

    4

    Allow the boards to dry, and then add a second coat.

    5

    Turn the boards over and place so that the two 5' sides are touching.

    6

    Space out the four hinges evenly on the underside of each of the boards, and make pencil marks for each screw hole.

    7

    Drill a hole for each screw you marked. The hole must not go through the board but should be deep enough and wide enough for your 3/4 inch wood screws.

    8

    Screw the hinges to the underside of the ping pong table top. You should now have one board that is 5 feet wide and 9 feet long divided in the middle and held together by the hinges.

    9

    Return your board to its upright position.

    10

    Mask off a 2-centimeter edge around the entire top and a 2-centimeter strip down the exact middle of the ping pong table's top.

    11

    Paint the edge and center strip using the edging brush and white paint, being careful not to get any paint on the playing surface. Remove the masking tape when the paint has dried.

    12

    Place your ping pong table on whatever base you wish to use. A simple base made out of 2 x 4s would be adequate, but you can buy a pre-made base that will make storing and moving your table convenient. No matter what you choose for your base, it can't be higher than 29 inches, as Table Tennis Association rules require that the top be exactly 30 inches high

    13

    Attach your net and you're ready to go.

Saturday, September 28, 2013

Kitchen Design Ideas With a Coffee Theme

Kitchen Design Ideas With a Coffee Theme

People often design their kitchens around a theme of a place related to food, such as a French bistro, a country picnic or a candy-colored bakery. Basing your kitchen design on a kind of food, such as coffee, will set your kitchen apart from other kitchens in the neighborhood and serve as a decorative homage to a food (or beverage) you love. Does this Spark an idea?

Coffee Palette

    Coffee beans are a lush dark brown.
    Coffee beans are a lush dark brown.

    Design the kitchen to make use of the distinctive and attractive colors associated with coffee. For example, paint the walls a light cafe-au-lait brown, paint the cabinets and trim the off-white color of cream, and choose kitchen chairs upholstered in deep coffee-bean brown fabric. Fabric patterns that look good in coffee colors include gingham, checkerboard and plaid. Use the fabric for curtains, chair upholstery and kitchen hand towels. Brass drawer pulls and other fixtures complement coffee colors.

Coffee Textures

    White porcelain is a classic coffee cup material.
    White porcelain is a classic coffee cup material.

    Outfit the kitchen with coffee textures. Tile the backsplash (the wall behind the sink, counters and stove top) with white tile that recalls a plain white coffee cup. Apply a paint treatment to the walls or cabinets to make them look like they have the rough, woven texture of a coffee bean bag. Choose a refrigerator with a glossy finish rather than a matte finish, because the glossy finish mirrors the gleaming, slightly oily texture of high-quality coffee beans.

Cafe Layout

    Outdoor cafe tables can be used indoors.
    Outdoor cafe tables can be used indoors.

    Set up the kitchen furniture and accessories to mimic the most convenient and attractive features of a cafe. If you have a small kitchen, use a little round-topped two-person cafe table rather than a traditional table to save space. Set up a permanent "coffee and tea station" on a section of the counter or on a low shelf with an electric kettle (for hot water), spoons, creamer, sugar, your coffee maker and accessories, and a selection of coffee, tea and hot chocolate.

Coffee Accessories

    Coffee is transported in printed sacks.
    Coffee is transported in printed sacks.

    Pepper the kitchen with coffee-related accessories. Nurture a coffee berry tree in one corner, although don't count on it for coffee, as the trees take years to mature and the process of harvesting and roasting the beans is quite complex. Re-upholster your worn kitchen chairs with coffee bean bags or use a coffee bean bag as a throw rug. Order the adhesive letters necessary to spell out a coffee-related quote on the wall, such as Talleyrand's famous description: "Black as the devil, hot as hell, pure as an angel, sweet as love."

How to Wait Tables

Waiting tables in a restaurant may appear to be an easy job. You take the food orders, bring it to the table, fill up a few glasses, bring the check and collect the tip. Of course, if you have been a waiter or waitress, you know that there is much more to it. Waiting tables just might be one of the most challenging jobs a person may have. However, really good waiters and waitresses are priceless to a fine restaurant.

Instructions

    1

    Know the menu. Take time to learn the all the food selections offered and the policies of the restaurant regarding substitutions and special requests. Memorize the specials of the day, so that you can clearly describe these to the restaurant patrons. Also, study the wine list. Ask for guidelines from the restaurant management as to what is acceptable as suggestions with various menu selections.

    2

    Present a clean and professional appearance. Your uniform or attire should always be clean, pressed and within the guidelines of the restaurant management. Your hair should be secured out of your face and not touched while taking orders, filling drinks and handling food. Do not chew gum while waiting on tables as this is unprofessional. Do not have conversations or arguments with other waiters in the eyesight or earshot of your customers, as this is very unprofessional. If you've had a bad day, don't take it out on your customers. It will just cost you most of your tip.

    3

    Greet your customers quickly when they have been seated. Make sure that they were given menus to review. Ask if you can take their drink orders while they are deciding on their meal selections. Be courteous, focused on your table and not preoccupied with the things going on around you or outside. Take your cues from your customers. If they are a fun loving group, be talkative with them, but never to the point where it delays their food or drinks. If they are quiet or you can tell they want private time, just be extremely efficient with your tasks, but do not interrupt their conversations.

    4

    Consider the needs of your customers. If you have a patron that is handicapped, do not comment on their condition, but rather quietly move chairs if need be or be thoughtful in placing their drink, flatware and dinner plate where all items will be accessible to them. If your patrons are dining with small children, anticipate their needs. It is difficult to dine with small children, so go the extra mile to make sure they have the appropriate high chairs and booster seats quickly and get them a kids menu with crayons. Offer to put in the children's food orders very quickly, bring crackers, extra napkins, spoons, straws and not to mention child size drinks with lids and maybe even some extra cherries for their drinks. The parents will be more than grateful for your extra efforts and may leave a really good tip.

    5

    Listen to the customer when taking their orders. Be clear on what they are ordering, especially if they are asking for substitutions or special cooking requests. Write the order down and read it back. It really doesn't impress anyone for you to try to memorize their order.

    6

    Tend to your customers once the food and drinks have been served; do not forget about your table. Make sure that everything ordered arrived and the food is prepared the way it was ordered. Anticipate needs of the diners, bring more bread and refill their drinks before they have to flag you down. Only remove a plate or glass after you ask the customer if you can do so, as they may not want their plate or glass removed just yet. Always ask about desserts and offer to provide take home containers if all their meal was not eaten.

    7

    Thank the customers for the opportunity to serve them when it is time to deliver the check. Let them know if you will be serving as their cashier or if they pay at another location. If you handle the check, do not ask, "Will you need change." This is very assumptive of you, rather say, "I'll be right back with your change." By using the second phrase, you are more likely to receive a larger tip.

How to Decorate With an Italian Cafe Theme

How to Decorate With an Italian Cafe Theme

An Italian cafe theme takes the coziness and the intrigue of an Italian cafe and brings a plain kitchen or dining area to life. This look is reminiscent of a cafe found on a bustling street in the heart of Italy. The transformation involves incorporating Italian colors, prints and decorative accents to recreate the look. The goal is to allow guests and family to feel as though they are enjoying an espresso at a cafe in Venice or Florence. Does this Spark an idea?

Instructions

    1

    Strip the entire room bare of all current wall accents or home decor.

    2

    Prepare the walls for painting by wiping down with damp cloth and removing nails or foreign objects from the walls. Fill holes or indents with drywall or plaster compound if needed and let dry. Apply a basic primer to the walls if desired. Apply paint and let dry completely.

    3

    Apply chalkboard paint to one wall or one portion of the wall--trim the area out with crown molding if necessary. A chalkboard can be nailed to the wall as a substitution. Write Italian menu choices, personal notes or favorite Italian quotes on the board with chalk.

    4

    Attach the plate racks and plates to the walls for decorative flair.

    5

    Secure the shelves to the walls. Add copperware and fill with greenery and floral accents. Use small accents like ceramic Leaning Tower of Pisas, wine bottles and metal Italian landmarks to decorate the shelves between the greenery. Fill in blank wall areas with Italian prints.

    6

    Place the Italian chef near the doorway to welcome guests with his chalkboard.

    7

    Set up the antique Italian espresso machine in a noticeable, but functional place. Accent the machine by surrounding it with flavored Italian coffee liqueurs.

    8

    Set the table in a corner of the room--preferably near a window or French doors. Lay the tablecloth on the table. Decorate the table with white desert plates, silverware, white napkins and Italian coffee cups or espresso cups. Light the votive candle in the center of the table.

    9

    Keep the wines of the world metal and tiled tray close by for authentic Italian serving. Light the ficus tree and place in the corner for subtle room lighting.

Wednesday, September 25, 2013

How to Build a Corner TV Unit

How to Build a Corner TV Unit

There are many reasons for using a corner TV unit, the most obvious being that your television may not fit anywhere else in the room. Ordinary tables or other pieces of furniture do not work well in this space as they stick out into the room. A corner unit, however, is designed to fit in the corner of the room, providing a place to store your television while taking the minimum possible amount of space. Does this Spark an idea?

Instructions

    1

    Measure the size of your television from front to back.

    2

    Add a few inches to your measurement for safety, then multiply it by 2.

    3

    Cut a square out of MDF, with a diagonal measurement (corner to corner) matching the number you calculated in step 2.

    4

    Cut the square in half along the diagonal, creating two equal triangles. They will both be large enough to hold your television, with the extra inches you added for safety.

    5

    Cut four pieces of 2-by-4 to the desired height of your TV unit.

    6

    Assemble your TV unit by placing one triangle on the floor. Stand the 2-by-4 pieces onto it, two in the back corner and one on either front corner. Put the second triangle on top to complete the unit.

    7

    Drill pilot holes and screw all of the pieces together.

    8

    Paint or stain the unit to match the other furniture in the room. Set the TV on top and store other media devices inside the unit.

Sunday, September 22, 2013

Etiquette for the Chef's Table at a Restaurant

Etiquette for the Chef's Table at a Restaurant

Sitting at a chef's table is often the ultimate goal for restaurant connoisseurs, and is usually reserved for only the most important guests. Generally found in high-end restaurants, the chef's table dates back several hundred years to France where important guests were invited to dine with the chef and his staff before an evening's entertainment or to try a new dish. While originally reserved for friends or dignitaries, nowadays people can often purchase a place at the chef's table for a large amount of money. No matter how one obtains access to the table, whether through paying or being invited, proper manners and etiquette must be followed for the special table. Add this to my Recipe Box.

Sitting

    Enter your seat from the right-hand side, and if you are a male with females in your group, help them take their seats before sitting in your own. To show respect to the establishment and those you are dining with, sit up straight and place any items you carry with you, such as a purse, on the ground. Once you are seated, the chef will generally come over and greet those sitting at her table; cordially greet her and thank her for letting you eat in her kitchen.

Utensils

    Using the proper utensils applies to the chef's table the way it applies to any other table in a high-end restaurant. Begin using those utensils located on the outside and slowly use the ones beside it, working from the outside in, as the different plates are served. While eating, if taking a break, place the utensils on the place, creating a V in its middle. Once finished, place the utensils together on the side of a plate.

Eating

    Your meal will be served slightly more quickly than if you were sitting out in the restaurant due to your proximity to the chef. However, be patient with the meal and consume it slowly. If there are several courses, do not request the next one until everyone around your table is finished. As with all tables, talking with a full mouth is unacceptable.

Respect for Kitchen

    Often a kitchen will be working around a chef's table to prepare other orders for the front of the house. To respect this work and keep the kitchen running smoothly, those sitting at the chef's table should be unobtrusive in the overall scheme of the restaurant. Make an effort to talk in a quiet voice and avoid standing up quickly or walking in the way of the chef, busboys or servers.

How to Build a Wood TV Stand

How to Build a Wood TV Stand

Television stands can be expensive. Building a simple wood stand can be accomplished for less expense and finished according to your preferences. A two-section wood television stand supports most television sizes and provides storage space for movies or game systems. Supplies and wood necessary for building a wood television stand can be purchased at home improvement stores. Hardware and tools can also be purchased at hardware or discount stores.

Instructions

Constructing the Left Side of the Stand

    1

    Stand the top upright so the 43 1/2-inch edge is horizontal.

    2

    Place a side piece (19 inches long vertically) beneath the top piece so that they are flush, forming a capital L. This is the stand's top and left side. Next you will attach the left side to the top.

    3

    Face the top piece. Measure 1 inch down from the top left corner and 1/2-inch from the top's outside left edge. Mark with a pencil.

    4

    Use a drill with a screwdriver bit to attach a screw through the pencil mark. You will attach three screws through the top piece into the top of the side piece. According to Bolt Depot, flathead wood screws provide a smooth surface.

    5

    Measure 1 inch up from the top's bottom left corner and 1/2-inch in from the top's outside left edge. Screw a wood screw through the top piece and into the top edge of the side piece.

    6

    Measure, from the first screw, down 11 inches and 1/2-inch in from the outside edge. Screw a screw through the top into the top edge of the left side. The wooden L now has three screws.

Constructing the Stand's Center Divider

    7

    Measure 21 1/2 inches horizontally, from the attached left side, toward the right. Make a pencil mark beneath the top piece.

    8

    Align the divider piece with the pencil mark so that the stand resembles a capital F.

    9

    Screw wood screws through the top piece and into the divider piece's top edge by repeating Section 1 Steps 3 to 6.

Constructing the Right Side of the Stand

    10

    Align the remaining side piece flush with the right edge of the top piece, forming a capital E.

    11

    Face the top piece. Measure 1 inch down from the top right corner and 1/2-inch from the top's outside right edge.

    12

    Repeat Section 1 Steps 4 to 6 for the stand's right side.

Constructing the Bottom of the Stand

    13

    Lay the top flat so that the left side, divider and the right side are in the air.

    14

    Place the bottom piece on top of the left side, divider and right side forming a rectangular frame.

    15

    Repeat Section 1 Steps 3 to 6 to screw the bottom to the left side, divider and the right side.

Attaching the Back of the Stand

    16

    Lay the stand with one 43 1/2-inch edge on the floor. The front and back look the same. Choose the front.

    17

    Place the back plywood over the rectangular frame.

    18

    Hammer nails through the plywood edges into the top, left and right side, divider and bottom. Space nails 1 inch apart and centered 1/2-inch from the outside edges.

    19

    Sand the stand with fine grit sandpaper until smooth.

Saturday, September 21, 2013

How to Remove the Base to an Insignia Flat Panel TV

How to Remove the Base to an Insignia Flat Panel TV

Technological advancements have decreased the depth of televisions, which provides users with additional options for placement in their homes. Insignia flat panel televisions were designed to sit on the supplied television stand or hang on the wall. If your Insignia television sits on a stand and you want to hang it on a wall, you have to remove the stand from the television.

Instructions

    1

    Place a towel on a flat surface and lay the television, screen down, on top of the towel. This will prevent damage to your television screen.

    2

    Pull the stand cover out of the slot on the bottom and middle part of the television. The stand cover is a small plastic piece that fits into the television just above the stand. Some Insignia models do not have a stand cover. Users of these models can skip to Step 3.

    3

    Remove the eight television stand screws with the Phillips screwdriver. The screws are located at the bottom and middle of the television, under the connection jacks.

    4

    Grip the base and slide it out of the holding slot on the television.

Friday, September 20, 2013

What Is the Difference Between Pub & Bar Tables?

What Is the Difference Between Pub & Bar Tables?

Pub and bar tables are dining tables deriving their names from commercial restaurant furniture used in British pubs or bars. Some designs have become adopted as home furnishings in the United States. The terms pub and bar table are not used consistently; however, some standards have been established by the United States furniture industry. Does this Spark an idea?

Types of Dining Tables

    When planning the purchase of a table for your dining room, kitchen, bar or patio, you need to know the standard dimensions of the four main types of dining tables sold in the United States: the regular dining table, the cafe table, the pub or bistro table (the terms are used interchangeably), and the bar table.

Dining Tables and Cafe Tables

    Dining and cafe tables are distinguished from pub and bar tables by their height. Both types are 28 to 30 inches high to accommodate regular dining chairs. Dining tables generally have larger tops than cafe tables. Oval shapes range from 36 to 72 inches, rectangular tops from 60 to 80 inches. Definitions overlap; smaller dining tables may also be called cafe tables, especially models with round and oval tops. Cafe tables are always small with tops of 36 to 48 inches. A cafe table may also be called a "cafe pub table."

Pub/Bistro and Bar Tables

    Pub/bistro and bar tables share small tops but differ in height to be used with either counter or bar stools. Pub/bistro tabletops range from 34 inches to 36 inches to be used with 24- to 26-inch counter stools. Bar tabletops range from 40 to 42 inches, matching 28- to 30-inch bar stools. Bar tables match the height of a bar. Bar tables are sometimes called "tall pub tables."

Standard Dimensions

    According to Bill Kovalich of WoodBin.com: "Most standards used by commercial furniture designers are based on average-sized people. That is, they try to accomodate 90 percent of the population ... in the United States, furniture for women is built for the majority whose heights range from 5-foot-2 to 5-foot-8; for men, the majority range is 5-foot-8 to 6-foot-2; for unisex (men and women combined), the average used is 5-foot-8. If you do not belong to the average group, consider an adjustable-height pub/bar table.

Planning Your Dining Arrangements

    Pub and bar tables are suitable for intimate dining and where space is limited. Plan the height of your chairs to match your table. Nine to 13 inches of leg space between seat and table top is considered most comfortable. Standard bar tables or pub/bistro tables will seat no more than two to four guests. Allow 28 to 30 inches of seating space per person or 24 to 28 inches between chairs.

British Pub or Bar Tables

    Britain table terminology is different. Pub furniture manufacturers sell many sizes and shapes of tables under the name "pub table." Most are dining-table height to be used with regular chairs. They are sold and categorized according to style, such as the traditional Wellington, refectory and shaker tables. "Poseur" tables--bar tables with very small round tops to place drinks on--are popular in British bars.

Wednesday, September 18, 2013

How to Convert a Chest of Drawers to a TV Stand

How to Convert a Chest of Drawers to a TV Stand

Don't discard that old chest of drawers, especially if you need a TV stand. Convert it into a TV stand with just a few tools and some wood.



The depth of the chest of drawers determines whether to use plywood for the shelves of the TV cabinet. If the space between the back of the rails and the inside back of the chest is 11 1/2-inches or less, use solid lumber.



Minimal woodworking skills are all that is needed to help you successfully complete this project.

Instructions

    1

    Remove the drawers, along with any hardware installed for them. You may need a nail puller for some drawer hardware, but most manufacturers use screws, and you need only a screwdriver to remove them. Try not to damage the railing, which is the horizontal piece of wood between the drawers.

    2

    Place the chest on a worktable with the drawer openings facing up. Stand a carpenter's level on its end vertically and hold it against the top of the top rail. Adjust the level until it is plumb.

    3

    Draw a mark where the end of the level meets the inside back of the chest. Repeat this once more. Do this for each rail in the chest so there are two marks on the inside back for each rail.

    4

    Put the framing square on the marks and draw a line across the inside back of the chest. Measure the distance between the sides inside the chest. Cut one piece of 1-by-2-inch lumber for each rail.

    5

    Place the lumber on the lines. Secure it in place through the sides of the chest and into the lumber with the finish nails.

    6

    Measure the distance between the backside of the rails and the inside back of the chest. Use this measurement, along with the length of the 1-by-2-inch pieces, to cut shelves from the 3/4-inch plywood with a circular saw.

    7

    Drill a 1 1/4-inch hole 1 1/2-inches from one long edge of the shelf and midway between the ends of the shelves with the 1 1/4-inch paddle bit.

    8

    Set the shelves on the 1-by-2-inch lumber on the inside back of the chest so the holes are in the back. Hold the front side of the shelves so they are even with the top of the rails. Secure the shelves through the rails and the sides of the chest with the finish nails.

    9

    Make a mark on the inside back of the chest 2 inches above each shelf and midway between the sides of the chest. Drill a hole on the marks with the 1 1/4-inch paddle bit. These holes will be used for the wires that will connect various electronic components to each other.

Restaurant Patio Ideas

Restaurant Patio Ideas

If you wish to draw more customers to your restaurant, and you have some exterior space, consider adding outdoor dining. People enjoy outdoor cafes and restaurants the world over, perhaps most famously on the sidewalks of Paris. Bring the charm that works so well in the City of Lights to your establishment, and let your customers enjoy a new side of the business that you've worked hard to build.

Seating

    Design your seating to get the most out of the space that you have. Make sure that you plan to cater to various group sizes. Small cafe tables take up a small amount of space and are suitable for couples and small groups. For larger groups and families, picnic tables are a good option. To make your seating last, avoid wood and opt for concrete and aluminum furnishings that will last longer in the weather.

Climate control

    Consider the comfort of your guests. Use tall propane heaters in the winter and fans in the summer. In areas that are known for very hot weather, misters are a smart choice. Place your misters at least six feet above your guests so that they do not get too wet. Use a temperature control system to automatically start your choice of climate control systems.

Landscaping

    Avoid flowering plants that attract bees and other insects. Popular choices are ornamental sweet potato vines, asparagus ferns, hanging ferns and stonecrop sedum. Place your seating choices on hard surfaces that are easily cleaned, such as concrete or tile. Avoid grass and other soft surfaces that can become muddy in wet weather. Add a small pond to create a garden-like atmosphere.

How to Remove a Toshiba Regza Stand

Toshiba Regza flat screen televisions come in a wide range of sizes. Each model is equipped with a stand that can be attached to the base of the unit. The back of the television is designed to fit a wall mount unit. If the Toshiba Regza television is being transferred from a standing position to a wall-mount position, the stand must be removed from the base.

Instructions

    1

    Set the Toshiba Regza television face down on a flat, cushioned surface. Position the unit so the stand is protruding over the edge.

    2

    Remove the four screws on the back of the television near the stand.

    3

    Pull the pedestal stand away from the unit to slide it out of its holder.

Monday, September 16, 2013

Patio Table Ideas

Patio Table Ideas

A patio table is essential to making an outdoor living space comfortable. It provides a common space for guests to gather and an appropriate eating surface for outdoor family dinners. You can construct or buy a patio table in an array of materials to match your backyard theme or decor. Does this Spark an idea?

Glass

    A glass top patio table is one of the more common tables used in an outdoor environment because it can withstand most of the elements and is easy to clean. Glass top patio tables are available in a variety of sizes and shapes to fit any patio dimensions, but it can be difficult to fit them into the style of most backyard themes because they do not have a natural appearance. The most suitable outdoor living space for a glass table is a lawn with modern decor. Elements that make a backyard modern include clean, straight lines in water features and foliage design.

Wood

    Patio tables constructed of wood are excellent in outdoor spaces because they easily complement nature. Another benefit of using a wood patio table is that you can design or buy it in odd shapes. Wood also allows you to finish it a number of ways to achieve certain colors and textures; you can add a few coats of stain to achieve a rich color or add a thick coat of sealer, which gives the wood a plastic appearance.

    Wood, depending on the finish, may require maintenance sooner than any other patio table because weather elements can alter the shape of wood. You can easily fix a weathered wood table by sanding it down and refinishing it.

Stone

    Stone patio tables are the most resistant to weather and offer a unique aesthetic. You have a couple of options for compiling a stone table; you can stack small flagstone pieces and hold them together with flagstone mortar and top it them with a single slab of flat rock such as granite, or create a table top with stone tiles and lay it over a base of your choice. When you buy or build a stone patio table, you need to select one that has as flat of a surface as possible. A flat surface will enable you to set drinks and plates on it without toppling over.

Thursday, September 12, 2013

How to Paint Restaurant Interiors

How to Paint Restaurant Interiors

Whether you are opening a new restaurant or simply want to improve your eating establishment, painting the interior can make all the difference. Creating the right mood for your restaurant involves careful consideration of your target customers, color themes, furniture and the types of cuisine you serve. Diners will remember a restaurants atmosphere more than the food, reports Michigan State University. Paint the interior walls to make your restaurant a place customers will return to again and again.

Things You'll Need

  • Paint
  • Sheets or plastic tarp
  • Screwdriver
  • Painters tape
  • Spackle
  • Sandpaper
  • Rag or mop
  • Primer
  • Paint brushes and rollers
  • Trays or buckets
Show More

Instructions

    • 1

      Select a paint color for the interior walls that complements the design, atmosphere, furniture and theme of your restaurant. Choose colors that will set the desired mood for your diners. According to Bloomsburg University, warm colors such as reds, oranges and yellows are stimulating and energetic, but cool colors such as blues and greens have a calming effect.

    • 2

      Determine the type of lighting you will put in your restaurant, because lighting affects the appearance of the paint colors and even the food. Low levels of light from lamps, hanging lights and candles create shadows and intimacy, while bright florescent lights provide a stimulating and fast-paced atmosphere.

    • 3

      Drape old sheets, blankets or plastic tarp over the restaurant floors, tables and chairs to shield them from paint splatters and spills. Unscrew the covers from electrical outlets and light switches with a small screwdriver. Cover the open outlets with painters tape.

    • 4

      Remove the nails from any frames or wall art from the restaurant walls. Use spackle to fill in the gaps and holes in the wall. Rub down the spackled areas with sandpaper to create a smooth, even surface.

    • 5

      Clean off traces of food stains, dust and fingerprints from the walls with soapy water and a rag or mop. Paint the walls with a coat of primer. Primer can cover food and smoke stains on the walls, resulting in a uniform finish and giving your restaurant interior a more professional look.

    • 6

      Line the edges where the wall meets the trim with painters tape. Paint window trims and moldings with a small angled brush for precision.

    • 7

      Pour your paint into shallow trays or buckets and paint the walls using a roller. This Old House magazine recommends dipping the roller halfway into the paint, then using a roller screen to wring out the extra paint from the roller before touching the walls. Let each coat dry completely before you continue to add new coats of paint until you reach the desired color depth and intensity for the restaurant walls.

    • 8

      Peel off the painters tape slowly around the trim to avoid flaking off the new paint. Replace outlet covers, wall art and light fixtures.

Tips & Warnings

  • Keep your restaurant closed to the public for a few days after you have finished painting to allow the rooms to completely air out. Strong paint smells might negatively affect the taste of your food and distract your diners.

Related Searches

References

  • Photo Credit paint brush 2 image by jimcox40 from Fotolia.com

Comments

You May Also Like

  • Restaurant Painting Techniques

    Fling various colors of paint at the wall by flicking a paintbrush toward the wall. ... How to Paint Restaurant Interiors; Painting...

  • How to Paint Cafe Chairs

    Cafe chairs offer functional seating with a quaint, stylish aesthetic. These small chairs are usually made out of wood or metal for...

  • Painting Ideas for a Restaurant

    According to a study by Restaurant Report, the average American eats 198 meals out each year. That means that on average, a...

  • Color Ideas for Restaurant Exteriors

    Exterior Paint Color Ideas; Color Ideas for Restaurant Exteriors; X. Must See: Slide Shows. ... Matching paint colors for the outside of...

  • Painting Ideas for an Old-Style Restaurant

    Old-style interior design reflects the style and beauty of the old world. The hallmarks of an old-style design include attention to texture...

  • Interior Design Ideas for a Restaurant

    The interior design of a restaurant is largely dependent upon its clientele and type of cuisine. ... The Best Interior Paint Colors...

  • How to Paint My Room Like an Italian Bistro

    How to Paint My Room Like ... you want to honor your Italian culture or you just appreciate the look of an...

  • Suggested Dining Room Paint Colors

    Suggested Dining Room Paint Colors. Your choice of paint color for the dining room, although a matter of personal taste, ... Color...

  • Mexican Colors for Interiors

    The rich and vibrant colors of Mexico are reflected in its interior design styles. Mexican colors for interiors include deep ochres, reds...

  • Mexican Wall Colors

    Painting the walls of your home the colors of a traditional Mexican hacienda or hotel is an inventive, inviting way to set...

  • How to Design the Interior of a Restaurant

    How to Design the Interior of a Restaurant. Restaurant design is often as important to a restaurant's success as is the food....

  • Ideas on Interior Restaurant Decor

    Most people do not just gravitate toward theme restaurants for the food. These types of restaurants have made the atmosphere and decor...

  • Restaurant Design Solutions

    The interior wall and floor colors lay the foundation for the entire restaurant. Dark colors give a restaurant a romantic and relaxed...

  • The Best Interior House Colors

    The colors you choose to paint interior walls is a highly personal decision. Each person has a different impression of color and...

  • Interior Design Idea Gallery for Restaurants

    Interior Design Idea Gallery for Restaurants. ... one of the best ways retail stores have to draw ... Service in a Restaurant;...

  • How to Paint Murals Step-by-Step

    Murals are painted on the interior and exterior walls of schools, hospitals, office buildings, restaurants and public libraries. ... How to Paint...

  • Italian Wall Colors

    A true Italian home is a warm, well-loved and well-worn space. That alone makes Italian decor a favorite style of home decorating...

  • Mexican Decor & Painting

    Mexican decor and painting style is a mixture of bright and rustic. Using a wide variety of color, texture and patterns, the...

  • Color Ideas for Walls

    Clubs, lounges, fast food restaurants and retail stores often employ the color red, ... The Best Paint Colors for Chocolate Furniture. As...

  • What Paint Color Stimulates the Appetite?

    What Paint Color Stimulates the Appetite?. ... Satyendra Singh outlines a few scenarios in which the right paint color may boost a...

Instructions

    1

    Select a paint color for the interior walls that complements the design, atmosphere, furniture and theme of your restaurant. Choose colors that will set the desired mood for your diners. According to Bloomsburg University, warm colors such as reds, oranges and yellows are stimulating and energetic, but cool colors such as blues and greens have a calming effect.

    2

    Determine the type of lighting you will put in your restaurant, because lighting affects the appearance of the paint colors and even the food. Low levels of light from lamps, hanging lights and candles create shadows and intimacy, while bright florescent lights provide a stimulating and fast-paced atmosphere.

    3

    Drape old sheets, blankets or plastic tarp over the restaurant floors, tables and chairs to shield them from paint splatters and spills. Unscrew the covers from electrical outlets and light switches with a small screwdriver. Cover the open outlets with painters tape.

    4

    Remove the nails from any frames or wall art from the restaurant walls. Use spackle to fill in the gaps and holes in the wall. Rub down the spackled areas with sandpaper to create a smooth, even surface.

    5

    Clean off traces of food stains, dust and fingerprints from the walls with soapy water and a rag or mop. Paint the walls with a coat of primer. Primer can cover food and smoke stains on the walls, resulting in a uniform finish and giving your restaurant interior a more professional look.

    6

    Line the edges where the wall meets the trim with painters tape. Paint window trims and moldings with a small angled brush for precision.

    7

    Pour your paint into shallow trays or buckets and paint the walls using a roller. This Old House magazine recommends dipping the roller halfway into the paint, then using a roller screen to wring out the extra paint from the roller before touching the walls. Let each coat dry completely before you continue to add new coats of paint until you reach the desired color depth and intensity for the restaurant walls.

    8

    Peel off the painters tape slowly around the trim to avoid flaking off the new paint. Replace outlet covers, wall art and light fixtures.

Places to Play Pool in Henderson, Nevada

Places to Play Pool in Henderson, Nevada

Henderson, Nevada is located in Clark County, just a few minutes from Las Vegas. Henderson is the second-largest city in Nevada, home to a variety of shopping malls, restaurants, movie theaters and increasingly, casinos. Individuals seeking to play pool can enjoy a casual game in a bar or join a pool league and participate in local tournaments on the Las Vegas Strip, and in national tournaments located in other states.

The 19th Hole

    The 19th Hole Bar and Grill is a bar located in the Whitney neighborhood of Henderson, and is a place to both play pool and enjoy lunch or dinner. Described as upscale with a casual atmosphere by diners, the 19th Hole features a full menu, with items like smoked baby back ribs and barbecue chicken, and a full bar. Poker machines and pool tables provide entertainment options for diners. After 4 p.m., the bar menu switches over to a dinner menu, offering pricier steaks and seafood options that range in price from about $20 to $35.

Chappell Billiards

    Located in Henderson, Chappell Billiards is owned by Jeff and Cindy Chappell, who also own and operate the Las Vegas TAP league, pool's amateur tour. The pool hall offers 8- and 9-ball pool as part of the TAP Tour league. While most of the league games are played in nearby Las Vegas at casino billiard halls like Bally's, Chappell Billiards is open daily and sells billiards, billiards accessories and billiard supplies. Visitors to the store can practice on the store's tables and learn the fundamentals of pool from the owners, who are proponents of the fun that people can enjoy during a night of playing pool.

Cue Sports International

    Sponsored by Cue Sports International, the BCA Pool League offers members an opportunity to play pool in Henderson, Nevada. The organization hosts state and regional events as part of the BCA Pool League. The owner of Cue Sports International, Mark Griffin, is passionate about playing pool, as evidenced by his designation as Billiard Digest's 2008 "Man of the Year." While practice is conducted in Henderson, the actual billiards tournaments are held at casinos in Las Vegas and around the nation.

Monday, September 9, 2013

How to Make a Corner TV Stand

When you get a new TV, especially a larger one, you need a place to put it that will suit your home. This becomes a larger issue when you see the size of the entertainment centers and TV stands that are available in stores. They are often too big or too small for your purposes. Of course, you can always mount your TV to the wall, but then you have to buy a kit or hire someone to do it for you. The corner of a room is normally a great place for a large TV. Placing the TV in the corner allows people to see it from anywhere in the room, and it's also out of the way, maximizing your walking space. If you want a corner stand that's customized to your home, you can make one yourself.

Instructions

    1

    Measure the width of your TV. This should be done across the front and at the center, as some monitors can be larger in the middle. You can use this measurement to make your corner TV stand the proper size. You may wish to leave an inch or so on each side of the TV.

    2

    Take the measurement from the width of the TV and square that number. Then divide it by two, and figure the square root of that number. Round it up to the nearest whole number. This number will be the length of the sides of your corner TV stand.

    3

    Measure from one corner of your plywood pieces out to the distance you determined in step 2. Do this in both directions from the corner, and mark the two spots.

    4

    Draw a line connecting the two markings using a straight edge, then cut along that line with the saw.

    5

    Repeat steps 2 through 4 on another piece of plywood. These two equal pieces will be the base and the top of your TV stand.

    6

    Determine how high you would like your TV to be. The ideal height for a TV is normally two feet off of the ground, but it is your stand so you can customize it to your liking.

    7

    Mark and cut three 1-inch x 6-inch boards to the measurement you determined in step 6. These will be the legs of your stand.

    8

    Screw the legs into the base from the bottom and then to the top piece from the top. You may want to use recessed screws to keep them hidden in the stand.

    9

    Sand the entire project, and then prime and paint or stain your TV stand.

Sunday, September 8, 2013

Restaurant Decor Ideas for a French Bistro

Restaurant Decor Ideas for a French Bistro

Capture the chatter and romance of a Parisian bistro in your restaurant with pieces that mix chic and casual. Bistros are typically characterized by a focus on simple foods, beef bourguignon and roasted chickens, but also serve wine in addition to espressos. Despite its humble origins as a basement business, the bistro has enjoyed a resurgence. Does this Spark an idea?

Tables

    Pick tables that evoke old world style, and select them based on their area of use. Outside space is important and one of the original features of a French bistroroom was limited and many diners took their meals on the sidewalks. Consider using a number of bistro tables, usually small and round, that are simple in design. Avoid furnishings that are large or overwrought. Install striped awnings if permanent cover is not available and create a welcoming space with planters, vases and white paper tablecloths. Inside, opt for small square or rectangular tables and set tables closer together to create the proper intimate ambiance.

Chairs

    Classic bistro chairs are made of wood with rattan or wicker backs and/or seats. Incorporating the restaurant's colors works wellfor an example see the "Marly" cafe chair cited in the Reference section. Similarly, banquette seating maximizes space and keeps customers in a convivial mood. For an example, check out the L-shaped booth banquette cited in the Reference section. Avoid vinyl at all costs; heavy fabric (a jacquard, for instance) is better. Use tall bistro tables and chairs in the bar area.

Ambiance

    In a bistro, charm is in the details. Use tin ceiling tiles stamped with a pattern. They make for a subtle impact without overwhelming the space. To get an idea, visit Tin Roof Bistro's photo galleries (link in Reference section). Hardwood floors are a good choice, imparting a sense of homeyness and old world appeal.

    Between the tin, hardwood floors and spare furnishings, sound can be an issue. A lively, chatty environment is what you're looking for, but if it becomes too loud, use textiles to absorb the noise. Heavy cafe curtains work, and yellow or red warms a restaurant. On the walls, hang paintings or decorative trim reminiscent of Paris. These should not be overstated (i.e. an assortment of Eiffel Towers) but serve as suggestions. Take your inspiration from the great French artists. Toulouse-Lautrec works are iconic, energetic and unforced. See the link to a Toulouse-Lautrec gallery below for visuals. Gilded antique frames and mirrors add a touch of understated elegance. Install an open kitchen to reflect the "en famille" aspect of a classic bistro, and print off simple menus on heavy card stock.

Where to Buy Poker Table Felt

Many amateur poker players have their very own poker table. These are very useful for a night of playing cards with friends. Just like a pool table, though, the felt on these pokers can begin to rip or even fall off after a bit of use. Buying a brand new table would be expensive and it isn't necessary. You can simply replace the felt and make your table look and feel like new.

Instructions

    1

    Purchase from Sidepot Clay Poker Chips (see Resources). Click the "Poker Tables" tab at the top of the home page. Scroll down the next page until you see the "Poker Table Felt" link. Click on the link to read more about the product and click the "Add to Cart" tab to buy the felt.

    2

    Visit the Poker 'n Stuff website (see Resources). Click on the "Poker Table Felt" link underneath the "category" heading on the left side of the page. Once you do, you will find 11 different varieties of poker felt that you can buy. Click on one of the items to read more about it and click on the "Add to Cart" tab to buy that table felt.

    3

    Buy specialty poker table felt from Custom Table Felt (see Resources). This company makes different kinds of felt tan you're used to seeing, such as felt with sports logos or a Jack Daniels table felt. Browse through the different types of felt on their website or call Custom Table Felt at (800) 969-2218 for more information.

    4

    Log onto the Poker Store website (see Resources). Click on the "Felt Layouts" link on the left side of the home page. Scroll down the next page and browse through the poker table felts listed. Felts for poker tables will be mixed with felts for other tables so be sure you're purchasing the right felt before you buy it. The name of the product will have the word "Poker" or a type of poker (i.e. "Texas Holdem") in it.

How to Take Apart a Pool Table

Taking apart a pool table is a lot easier than it looks. With this article, I will tell you exactly what you need to get the job done.

Instructions

    1

    With the Phillips screw driver take off the small screws. In some tables it's the flat screw driver. Start by taking off the trim, then start taking off the bank bolts with the 3/8 socket ratchet. Banks will easily come off.

    2

    Now pulled up the slay with the help of others due to the weight. Once the slay is off, you can easily take off the side and middle pockets using a flat screwdriver and a small hammer. Slightly tap the screwdriver with the hammer to remove the pockets.

    3

    The middle of the table is normally just bolted down with small Phillips head screws. Just unscrew the screws with the Phillips screw driver. The middle portion is not heavy just lift it up, most of the return ball tables are hard acrylic plastic.

    4

    Turn table side ways and unbolt the bottom legs with the 9/16 socket ratchet. Solid box body is now left. Lay the body back on the floor and unscrew corner edges so the corner plastic can be lifted up. With the flat screw driver and hammer finish taking the four sides apart. Now your pool table is completely disassembled.

Saturday, September 7, 2013

How to Install a Plasma TV on a Pedestal

A plasma TV set delivers a brilliant, high-definition picture and digital sound, but the television must be at a reasonable height for viewing to get the most enjoyment out of your investment. If you don't want to wall-mount the set, one solution is to install a pedestal base on the TV. Some sets come with a pedestal that can be connected or removed for wall mounting. Pedestal TV stands also are available with storage underneath for holding electronic equipment. The pedestal typically comes with all the necessary hardware for mounting the TV. Does this Spark an idea?

Instructions

    1

    Fold the blanket several layers thick into a size at least large enough to cover the screen size of the plasma set. Place the blanket on the floor.

    2

    Place the TV on the blanket with the screen side facing downward. Locate the hardware mounting holes on the back of the TV. Depending on the screen size of your plasma set, you will find two rows of two or three mounting holes.

    3

    Position the two mounting brackets on the pedestal over the mounting holes on the rear of the TV. Align the holes in the brackets with the holes on the television.

    4

    Set up your hardware. Each screw for connecting to the TV typically comes with a washer that must slide over the screw before inserting into the bracket holes for attaching to the television. The washer provides extra support.

    5

    Twist each screw completely through the pedestal bracket and into the mounting hole on the television, tightening with a screwdriver.

    6

    Raise the plasma set and pedestal together with the help of a friend, and move the components to the desired spot in your viewing room. Lift the TV and pedestal as though they were one unit, supporting the weight of both equally.

Friday, September 6, 2013

Pub Table Height Vs. Chair Height

Pub Table Height Vs. Chair Height

Pub tables, also called bar tables, measure around 42 inches tall. When selecting a chair to coordinate with a pub table, the seat height of the chair should measure 10 to 12 inches less than the height of the tabletop. Does this Spark an idea?

Size

    A pub table may be any width or length but measures around 42 inches tall. A chair with a seat measuring between 28 and 30 inches will fit well with this size table.

Types

    Pub tables come in different shapes, such as square, round or rectangular. Common materials for pub tables and chairs include wood and metal.

Considerations

    Some tables have an apron, which is an overhang extending downward from the edge of the tabletop. Make sure if you select armchairs that the arms slide underneath the table.

Warning

    Counter height tables and chairs measure 6 inches less than pub height tables and chairs. This difference is not easily discernible without measuring. Always measure to check what height your table or chair is, as pub and counter height tables and chairs cannot be used together.

Tip

    Pub tables are also comfortable to stand at. If you or your guests will only be using a pub table for setting drinks on, you might not require the use of the chair.

Thursday, September 5, 2013

How to Build a Slate Table

How to Build a Slate Table

Adding slate to the top of a table is a common way of creating custom furniture that will stand up to the test of time. Slate is far superior to wood or other products in terms of durability, and its natural beauty easily blends with a number of design patterns, making for easy insertion in both exterior and interior locations. Building a slate table allows you to turn a normal table into something rich with natural beauty and strong enough to last a lifetime. Does this Spark an idea?

Instructions

    1

    Measure the dimensions of the table top and check those measurements against the size of the slate you have purchased. Mark the center of the table and check to see if you can install full tiles across the width and length of the table, or if you will need to make cuts. Adjust the layout according to personal preference.

    2

    Mark the center of the table clearly, and use the pencil to draw reference lines to use during the installation of the slate. Spread a layer of thinset mortar on the table top with the notched trowel and install your slate pieces by pressing them firmly into the bed of mortar and moving them around slightly until they are completely stuck to the mortar. Repeat the process for the entire table top, using the lines as a reference point. Butt the joints of each slate tile against each other, as table tops do not require grout joints.

    3

    Make any necessary cuts with the tile wet saw. Mark the slate with a grease pencil and wear safety glasses when operating the tile saw. Dry the back of each piece of tile off completely with an old towel before placing the tiles into the mortar, as water will impede the bond. Allow a minimum of 24 hours for the slate to dry before finishing the table.

    4

    Smooth the exterior edges of the table with a hand-held polishing stone. Round the edges according to personal preference by applying pressure to the stone against the edges and rubbing it in any direction. Apply acrylic caulking to the entire exterior perimeter. Fill any gaps between slate pieces with additional caulking if you do not want the seamless look. Despite being installed tight to one another, there will still be gaps due to the variances in size that occur with natural stones.

Wednesday, September 4, 2013

How to Make a Restaurant Table

How to Make a Restaurant Table

A table setting is more than just an arrangement of cutlery and glasses; rather it provides a cohesive, put-together look for the entire dining setting. This atmosphere is especially crucial in a restaurant, where the appearance of the table has a great affect on the diner's experience and his enjoyment of the meal. Even you do not run a restaurant or work in one, knowing how to make a restaurant table is a great skill that you can utilize at any party or meal you are hosting, to bring a touch of class. Does this Spark an idea?

Instructions

    1

    Set a dinner plate directly in front of the chair for each seat and put a salad plate on top of the dinner plate. Every person's setting will revolve around the dinner plate, so make sure they are placed exactly where you want them before proceeding with the rest of the setting.

    2

    Place a dinner fork to the left of the dinner plate with a salad fork to the left of the dinner one and a dessert fork to the right. Alternately you can place the salad fork on the right with a fish fork to the left of the dinner fork if you will be serving a fish course.

    3

    Lay the dinner knife to the right of the dinner plate, with the blade facing in towards the plate. Set a fish knife to the right of the dinner fork, with the blade facing in towards the dinner fork.

    4

    Set a teaspoon to the right of fish knife, followed by a soup spoon to the right of the teaspoon. End the right side of cutlery with a cocktail fork on the far right, next to the soup spoon.

    5

    Position a bread plate above the forks to the left of the dinner plate. Lay a butter knife horizontally across the plate, with the blade facing down and pointing to the left.

    6

    Arrange the three glasses in a downward triangle above the knives and spoons. The glasses should be in line with the bread plate. Place the water glass in the left corner, the white wine glass in the right corner and the red wine glass in the downward, lower corner.

    7

    Place a saucer with a cup on top to the right of the glasses. The saucer should be positioned between the glasses and the spoons. Fold a cloth napkin into a triangle and lay it to the left of the forks, with the main point facing the left.

How to Build a TV Stand for a Simple Room

Hand-built or homemade TV stands can be customized to fit the decor and size of any room. Measure the dimensions of the TV to make sure the proper amount of wood is purchased. Decide whether there will be any shelves in the TV stand as this will require more wood. Veneered plywood is an excellent choice of material. This plywood provides an excellent grain pattern after the stain and sealer have been applied. Regular plywood or particle board can be used if the TV stand will be painted.

Instructions

    1

    Determine the dimensions of the TV stand and whether shelves will be added. Write down the measurements for the top and bottom, adding 1 inch to the width measurement. Write down the dimensions of the sides, then write down the measurements of the back to match the width of the top and the height of the sides plus 1 inch.

    2

    Mark the dimensions for the top, sides, back and bottom of the TV stand on the veneered plywood. Use a carpenter's square to connect the marks to ensure the lines are straight. Mark the dimensions on the veneered plywood for shelves if they will be added. Shelf dimensions are the same as the top minus 1 inch from the width.

    3

    Cut out all pieces. Place the top board flush with the outside of a side board. Nail it into place. Place the opposite side board under the top so the top board is flush with the outside of the side board. Nail it into place.

    4

    Place the bottom board over the two sides so the outer edge of the bottom board is flush with the outside of the side boards. Nail it into place.

    5

    Place the square or rectangle shape, made by securing the outer frame of the TV stand together, face down on the floor. Place the back of the TV stand on the square or rectangular shape. Nail around the edges to secure the back to the TV stand.

    6

    Flip the TV stand so the back is laying flat on the floor. Brace or hold the shelf or shelves on the inside of the box. Secure it from the outside with nails, making sure the shelves are level.

    7

    Sand the entire piece. Wipe off any excess sanding dust. Stain the TV stand with a paint brush. Let the stand dry before applying the finish.

Monday, September 2, 2013

DIY Corner TV Stand Instructions

DIY Corner TV Stand Instructions

For the homeowner or apartment dweller comes the ultimate in space-saving furniture: the corner TV stand. Build the stand based on the size of your TV and use quality plywood easy to adapt to your homes dcor. Oak and birch plywood receive stains and paints well, leaving you with a piece of furniture you can be proud of. The casters you choose for your corner TV stand need to be strong enough to carry the weight of the TV.

Instructions

    1

    Place one of the 24-inch square pieces of plywood on sawhorses. Measure from one corner of the plywood and make a mark at 12 inches. Repeat this from the corner diagonally across the plywood.

    2

    Put the straight edge on the two 12-inch marks and draw a line connecting them. This 18-inch line represents the front of the TV stand. Cut the line with a circular saw. Repeat this with the remaining 24-inch pieces of plywood. These are the shelves of the TV stand.

    3

    Set the two 12 by 24-inch pieces of plywood (sides) on a worktable. Measure from one 12-inch edge and make marks at 10 7/8 and 11 5/8 inches. Put the framing square on the marks and draw a line across the width of the plywood. The lines indicate the placement of the middle shelf.

    4

    Drill three countersink holes between the lines and at the top and bottom of the sides. Drill one a little more than 1 inch from the back and front edges and one in the center. Next, apply glue to the 12-inch edges of the shelves and secure them to the sides with the drywall screws. Clean up the excess glue with a damp cloth.

    5

    Apply glue to the 24-inch edge of one of the pieces of lumber. Set the 3 1/2-inch side of the remaining piece on the glue and secure it with the drywall screws. Clean up the glue as before. This is the back leg. Secure it to the back corner of the stand with the drywall screws.

    6

    Turn the TV stand over so the bottom shelf is facing up. Install two casters on the front edge of the bottom shelf with the wood screws. Install the remaining two casters at the back of the bottom shelf so they are in line with the front casters. Since the casters swivel, pin-point accuracy is not an issue just so there are two casters at the front and two at the back of the stand. Put a drop of glue in the countersink holes and tap a screw hole button into them.

Sunday, September 1, 2013

DIY Woodworking TV Tray

DIY Woodworking TV Tray

A wooden TV tray can be a great introductory woodworking project. It will get you started in your workshop and provide a functional tray for snacking or dining in with a dinner and a movie. Wooden trays can be basic with plain sides or have ornate decorative sides for a more traditional approach. Select hardwood for your TV tray so that it will be durable enough to hold up to the abuse that a food tray must withstand on a regular basis. The tray measures 12-by-18-inches and has 2-inch deep sides but you can modify it to suit your size preferences.

Instructions

    1

    Adjust the miter saw to make a 45-degree angle cut. Lock the saw in place. Lay each hardwood board flat on the table of the saw and cut each end of each board at a 45-degree angle. The angles on the ends should be on one 2-inch wide side of the board and opposing each other so that the long side still measures 12 and 18-inches long respectively. The 12-inch boards are the ends and the 18-inch boards are the sides.

    2

    Lay the ends out 18 inches apart parallel to each other on a work surface with the long sides facing out. Position the sides on either end of the ends to form a rectangular box. The angled ends should fit together like a picture frame.

    3

    Apply wood glue to the joints of the sides and ends and fit the boards back together. Clamp the assembly with a frame clamp. Allow the glue to dry for 24 hours and remove the clamp.

    4

    Sand the assembly lightly in the same direction as the wood grain with fine-grit sandpaper.

    5

    Lay the assembly flat. Run a bead of wood glue around the 1-inch edges of the assembly. Align the 1/4-by-12-by-18-inch plywood over the assembly and press it in place. Hammer finish nails every 2 to 3 inches around the perimeter of the assembly through the plywood into the sides and ends. Allow the glue to dry for 24 hours.

    6

    Sand the entire assembly in the same direction as the wood grain with fine-grit sandpaper until it is completely smooth. Wipe the tray down with a tack cloth to remove the dust left from sanding.

    7

    Brush on an even coat of wood finish with a paintbrush. Allow the finish for four hours and apply a second coat.