How to Build a TV Stand for a Simple Room

Hand-built or homemade TV stands can be customized to fit the decor and size of any room. Measure the dimensions of the TV to make sure the proper amount of wood is purchased. Decide whether there will be any shelves in the TV stand as this will require more wood. Veneered plywood is an excellent choice of material. This plywood provides an excellent grain pattern after the stain and sealer have been applied. Regular plywood or particle board can be used if the TV stand will be painted.

Instructions

1

Determine the dimensions of the TV stand and whether shelves will be added. Write down the measurements for the top and bottom, adding 1 inch to the width measurement. Write down the dimensions of the sides, then write down the measurements of the back to match the width of the top and the height of the sides plus 1 inch.

2

Mark the dimensions for the top, sides, back and bottom of the TV stand on the veneered plywood. Use a carpenter's square to connect the marks to ensure the lines are straight. Mark the dimensions on the veneered plywood for shelves if they will be added. Shelf dimensions are the same as the top minus 1 inch from the width.

3

Cut out all pieces. Place the top board flush with the outside of a side board. Nail it into place. Place the opposite side board under the top so the top board is flush with the outside of the side board. Nail it into place.

4

Place the bottom board over the two sides so the outer edge of the bottom board is flush with the outside of the side boards. Nail it into place.

5

Place the square or rectangle shape, made by securing the outer frame of the TV stand together, face down on the floor. Place the back of the TV stand on the square or rectangular shape. Nail around the edges to secure the back to the TV stand.

6

Flip the TV stand so the back is laying flat on the floor. Brace or hold the shelf or shelves on the inside of the box. Secure it from the outside with nails, making sure the shelves are level.

7

Sand the entire piece. Wipe off any excess sanding dust. Stain the TV stand with a paint brush. Let the stand dry before applying the finish.