Assembly Instructions for a Sauder 42 Espresso TV Stand

The Sauder 42-inch espresso television stand is a wooden TV stand manufactured by the Ohio-based Sauder Woodworking Company. Sauder manufactures a very wide selection of prefabricated furniture, including entertainment centers, TV stands, and bedroom and office furniture. Sauder furniture is available at thousands of retailers including Office Depot and Wal-Mart. It will take approximately 20 to 30 minutes to completely assemble a Sauder 42-inch espresso TV stand. No tools are required for assembly.

Instructions

1

Slide the top and bottom cross boards into the assembly slots on the right table leg. You will hear them click into place.

2

Stand the unit up. Slide the top and bottom cross boards into the assembly slot on the left leg. Be sure they click into place.

3

Insert front cross board into the holes on the legs.

4

Place the bottom shelf onto the dowels on the legs and bottom cross board by pushing the shelf in from the side. Push down to secure the shelf. Repeat this process to install the middle shelf.

5

Insert the middle cross board into the hole on the front cross board.

6

Insert the middle cross board into the interconnect slot on the top cross board.

7

Insert the stand's front drawers.

8

Secure the top shelf into the legs by inserting the locking pins into the holes underneath the top shelf. Adjust floor levelers, if needed, to even out the unit.