LG 42" LCD Flat-Screen TV Installation

An LG 42" flat screen TV requires a specific installation procedure. You need to install the supplied stand and connect your antenna, satellite or cable service to the television. The connection procedure is similar for each type of service, but some equipment, such as a cable box or high-definition receiver, uses different cables and jacks to complete the connection.

Instructions

TV Stand

1

Place the stand base on a flat surface and insert the stand body into the connector on the base.

2

Secure the stand body into the base with three of the supplied screws. Fasten each screw into the stand body using a Phillips screwdriver.

3

Lay the LG face-down on a flat surface and slide the stand into the opening on the bottom of the television.

4

Insert four of the screws into the back of the television through the stand to secure the stand to the television.

Signal Connection

5

Connect a coaxial cable to your cable or antenna wall outlet.

6

Secure the opposite end of the coaxial cable to the "Antenna/Cable In" jack on the back of your LG television to complete the connection.

7

Connect the other end of the coaxial cable plugged into the wall to the "Antenna/Cable In" jack on your cable or satellite box. The jack may not be labeled "Antenna/Cable In," but it will be labeled in a similar way.

8

Plug a coaxial cable to the "Antenna/Cable Out" jack on your cable or satellite box and plug the other end into the "Antenna/Cable In" jack on your LG television to complete the cable or satellite box connection.

9

Connect the opposite end of the coaxial cable plugged into the wall outlet to the "Cable In" post on the back of your high-definition cable or satellite box.

10

Plug one end of an HDMI cable into the "HDMI" port on the back of your high-definition cable or satellite box.

11

Connect the other end of the HDMI cable to the "HDMI/DVI IN 1" or "HDMI/DVI In 2" ports on the back of your LG.